Stanley Black & Decker Recalls 2.2 Million DeWALT, Stanley and Craftsman Fiberglass Sledgehammers Due to Impact Injury Hazard

The head of the sledgehammers can loosen prematurely and detach unexpectedly during use, posing an impact injury hazard to the user.

About 2.2 million (In addition, about 53,000 in Canada)

Stanley Black & Decker toll-free at 855-418-3032 from 8 a.m. to 6 p.m. ET Monday through Friday, or online at https://stanleyblackanddecker.com/sledgehammerrecall or at www.dewalt.com, www.craftsman.com or www.stanleytools.com and click on "Safety Notices and Recalls" for more information.

This recall involves certain DeWALT, Stanley FATMAX and Craftsman Fiberglass Sledgehammers. The recalled sledgehammers weigh between 2 and 12 pounds and range between 14" and 36" in length. The DeWALT sledgehammers are yellow and black, the Stanley sledgehammers are yellow and black and the Craftsman sledgehammers are red and black. Each sledgehammer has the brand written on the handle. The model numbers of the DeWALT and Craftsman hammers are marked on the hammer head. Model numbers of the Stanley hammers are located on a sticker on the handle.

Model No.

Description

DWHT56141

2lb Fiberglass Drilling Hammer

DWHT56142

3lb Fiberglass Drilling Hammer

DWHT56143

2-1/2 lb Fiberglass Engineering Hammer

DWHT56146

2-1/2 lb Fiberglass Blacksmith Hammer

DWHT56147

4lb Fiberglass Blacksmith Hammer

DWHT56148

4lb Fiberglass Engineering Hammer

DWHT56024

4lb Drilling Sledgehammer - hollow handle

DWHT56025

4lb BS Sledgehammer - hollow handle

DWHT56026

4lb ENG Sledgehammer - hollow handle

DWHT56027

6lb Sledgehammer - hollow handle

DWHT56029

10lb Sledge 36"Hammer - hollow handle

DWHT56030

12lb Sledgehammer - hollow handle

Model No.

Description

CMHT54163

4 LB Engineering Hammer

CMHT56006

3 LB Drilling Hammer

CMHT56011

8 LB Sledgehammer

CMHT56019

10 LB Sledgehammer

Model No.

Description

FMHT51297

4 LB Engineer Hammer

FMHT51298

4 LB Blacksmith Hammer

FMHT51308

3 LB Drilling Hammer

FMHT56006

3 LB Drilling Hammer

FMHT56008

4 LB Blacksmith Hammer

FMHT56009

4 LB Engineer Hammer

FMHT56010

6 LB FATMAX Sledgehammer

FMHT56011

8 LB FATMAX Sledgehammer

FMHT56019

10 LB FATMAX Sledgehammer

Consumers should immediately stop using the recalled sledgehammers and contact Stanley Black & Decker for instructions to receive a full refund. Consumers must provide their contact information.

The firm has received 192 reports of the sledgehammer's head detaching, including two reported injuries to consumers’ face and head.

Black & Decker (U.S.) Inc., of Towson, Maryland (DeWALT sledgehammers); Stanley Black & Decker, Inc., of New Britain, Connecticut (Craftsman and Stanley FATMAX sledgehammers)

Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.

A component inside the furnace was improperly assembled, causing the furnace to produce high levels of carbon monoxide (CO) under certain operating conditions, which poses a risk of CO poisoning to the consumer.

Under severe weather conditions, such as hurricanes, the adhesive bond holding the doorglass inserts can become separated from the door causing a risk of injury and property damage from windborne debris.

The power cord can become damaged near the cord bushing, which can lead to overheating of the cord, posing fire and burn hazards. In addition, cord damage near the bushing can result in exposed copper wires, posing a shock hazard.

The head of the sledgehammers can loosen prematurely and detach unexpectedly during use, posing an impact injury hazard to the user.

The circuit board inside the vacuum's battery pack can overheat and smoke, posing a fire hazard.

Delayed ignition and/or flame rollout can occur with the boilers, posing a burn hazard.

The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.

Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.